Crossbars for the third generation Mazda 3 Hatchback designated as BM from 2013 to 2019. All kits in the offer are designed for a bare roof, so you just need to choose a suitable load bar profile.
This hatchback features a bare roof without any pre-prepared elements. The carrier feet rest directly on the roof edge and are secured using custom-shaped steel clamps under the upper door hem.
Direct contact areas are protected by custom rubber pads that follow the body line. Before each installation, it is recommended to thoroughly wash and degrease the contact points on the roof and door frames so that dust and small impurities under the pressure of the feet do not damage the vehicle paint.
The BM generation covers production years 2013 to 2019. If your vehicle was manufactured in 2019, verify the exact generation in your vehicle registration document. In that year, production of the successor generation BP began, which has a different door frame profile. The older generation BK also had a different roof solution.
Each manufacturer supplies its kits in different compositions. Therefore, always check the specific package contents and parts list directly in the selected product detail.
The sporty-cut hatchback body requires attention when placing accessories. Before tightening the roof box or longer ski racks, test opening the trunk fully. This will prevent the trunk lid from contacting the rear of the cargo or the antenna.
The total permitted roof load capacity includes the cargo itself, the weight of the carrier, and the weight of the accessories. The maximum permitted roof load is specified by the manufacturer in the vehicle manual.
Choose a suitable setup according to the crossbar shape, or browse other models in the Mazda 3 Hatchback category and the full range of Mazda vehicles.
8 sets
