Crossbars for the first-generation Opel Insignia Sedan from 2008 to 2017. For this body type, we offer kits designed for a bare roof, just choose the suitable bar profile.
The first-generation Insignia Sedan has a clean roof line without any protrusions. Kits for a bare roof are therefore anchored using shaped steel clamps directly behind the body lip above the doors.
The roof rack feet rest on the paint via soft pads that copy the curvature of the roof. Before each installation, thoroughly clean the contact points from dust and road dirt so that small grains of sand under the pressure of the feet do not damage the paint.
When choosing a rack, consider what exactly you plan to carry on the roof. If you already have a roof box or bicycle racks at home, check their mounting system. Accessories are mounted either by wrapping around the profile using U-bolts or by sliding adapters into the groove on the top side of the aluminum bars.
Both steel and aluminum bars will do the same job when transporting luggage or sports equipment. Aluminum profiles tend to cause less aerodynamic noise at highway speeds thanks to their aerodynamic cross-section.
Verify the scope of delivery and technical parameters in the detail of the specific product, where the exact composition of the given kit is stated. Also remember that the total roof load includes the weight of the cargo, the box itself, and the racks. You can find the maximum limit in the vehicle manual.
Choose a kit according to your requirements. If you are looking for racks for the station wagon version, check out the offer for Insignia Sports Tourer or go to the categories Insignia Sedan and Opel.
12 sets
